LP7850

电源 PMU
附件下载

主要特点

最大充电电流(mA)
1000
充电电流可编辑
Y
充电工作电压(V)
4.5~28
过压保护(V)
Y
静态电流(uA)
1
电池电压(V)
4.2
输出电流(A)
16
电池过放电压(V)
-
产品特征/功能
充放电二合一芯片
封装
TDFN-8(3*3)
  • IP66高防护,支持户外安装
  • 交直流二级防雷,主动消除雷击隐患
  • 支持直流拉弧检测功能,准确分辨异常电弧,避免火灾
  • 智能IV诊断,可精确定位组串故障
  • 支持故障录波,实时观测并记录逆变器交流侧电压、电流波形,减少本地运维成本
  • 支持RS485/WiFi/4G/Bluetooth,手机/电脑智能监控,随时随地操作更便捷
 
技术参数(产品仍在持续更新中,如有升级恕不通知)
概述
The LP7850 contains a complete constant-current/constant voltage linear charger for single cell lithium-ion battery. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture.Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be ISET programmed externally with a single resistor. automatically terminates the charge cycle when the charge current drops to 1/10 setting current value after the final float voltage is reached. When the input supply is removed, the LP7850 automatically enters a low current state, dropping the battery drain current to less than 1µA. The LP7850 contains a 16A large current discharge ,output voltage control by switching the voltage level on DIM pin .The LP7850 its TDFN-8 package and low external component count make ideally suited for portable applications.
应用
◆ Portable Media Players/Game
◆ Power Bank
◆ Bluetooth Applications
◆ PDA/MID
数据参数
数据参数
最大充电电流(mA)
1000
充电电流可编辑
Y
充电工作电压(V)
4.5~28
过压保护(V)
Y
静态电流(uA)
1
电池电压(V)
4.2
输出电流(A)
16
电池过放电压(V)
-
产品特征/功能
充放电二合一芯片
封装
TDFN-8(3*3)
特征
特征
◆ Input Voltage up to 28V
◆ Input Over Voltage Protection:7V
◆ Programmable Charge Current up to 1A
◆ 1µA Battery Reverse Current
◆ Protection of Reverse Connection of Battery
◆ Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating
◆ 16A large current discharge
◆ Low RDS(ON) Internal Switches:12mΩ
◆ TDFN-8 3mm*3mm Package
◆ RoHS Compliant and 100% Lead (Pb)-Free
TOP